Idiomas disponibles
Idiomas disponibles
GENERAL DESCRIPTION
Briefly
The KNX 4-channel 16 AX actuator– DIN rail mounting allows up to 4 different electrical
loads to be activated/deactivated separately by means of 4 x 16 AX relays, each one
fitted with 1 NO output contact. The relay switchover command can come from command
devices or sensors of the Building Automation system via the KNX bus or generated
locally via the front push-buttons.
The actuator is powered from the BUS line and is equipped with 4 front green LEDs for
signalling the output status. The device sends information to the bus about the relay
status (ON = contact closed, OFF = contact open) when switching on, receiving a
command and in the case of a command from a local push-button.
Each output channel of the actuator can be configured separately and allows the ON/OFF
command of the controlled loads, execution of timed commands, scene management
and execution of priority commands to force the output status. The functioning modes can
be used simultaneously by means of distinct communication objects.
This means, for instance, that the device can switch a light on and off, or automatically
switch it on and off after a certain pre-established time, simply on the basis of the
command received.
The module is assembled on the DIN rail, inside the electric boards or junction boxes.
14
