Idiomas disponibles
Idiomas disponibles
5. Turn the spool cap clock-wise to wind the cutting
line into the trimmer head. Keep approximately 5 in
of cutting line above out of each side of the trimmer
head.
5.1"
(130
)
mm
=
10.4 REPLACE THE SPOOL
1. Push the tabs on the sides of the trimmer head at
the same time.
2. Pull and remove the spool cover.
English
3. Remove the remaining spool.
4. Put the spool in the spool housing.
5.1"
(130
)
mm
=
5. Push the tabs and install the spool cover onto the
6. Push the spool cover until it clicks into position.
11
spool housing.
EN
