Idiomas disponibles
Idiomas disponibles
Operating
Humidifier
Controls
(cent'd)
Speed Button
This humidifier is equipped with a 4-
speed fan control
Each push of the
speed button advances the mode
through the settings of HIGH, MEDIUM,
LOW and WHISPER. The selected set-
ting is displayed on the digital readout.
The higher the setting, the faster water is
evaporated
and released into the air.
WHISPER is the quietest setting and is
provided for conditions
that do not
require a rapid evaporation rate.
Humidity
Control
The +/- buttons allows you to adjust the
humidity to suit your needs. This
humidifier wiII automatically
cycle on and
off as required to maintain the selected
setting. The readout displays both actual
(ROOM) and desired (SET) humidity per-
centage (%) settings. The ROOM reading
is the larger display of the two. The
ROOM readout is dispiayed in 1% incre-
ments and has a range of 25% to 95%.
If the room humidity level is equal to or
less than 25% the display will show a
flashing 25.
The SET readout has a range of 30% to
65% and is adjusted in increments of
5%. Each press of the
(+} button increases the setting by 5%
and conversely each press of the ( - )
button decreases the setting by 5%. A
SET point of 65% operates the humidifier
continuously
regardless of the ROOM
reading.
The humidistat that senses the readings
is located on the power cord. Insure that
it is free from obstruction.
Constant
On Setting
