GET SX1 CONNECT Manual Del Usuario página 5

C. INSTALLATION AND COMMISSIONING OF SX1 CONNECT
1.
Fasten SX1 CONNECT in
a well-protected point on the
motorcycle. Secure
clamps if you want to install it on
the upper part of the front fork.
WARNING:
make sure the device remains
in a position protected from
impacts and away from spark
plug cables, coils and sources
of excessive heat.
2.
Connect the SX1 CONNECT
connector to the connector on
it with the "MAIN" cable of the GET
control unit.
SX1 CONNECT
ATTENTION:
-To connect the SX1 CONNECT
and the SX1 CONTROLLER
control unit simultaneously,
use the GL-264-AA harness
included in the SX1 PRO
control unit kit.
-Always make sure that the
connectors are correctly
associated; you will hear a
"click" when you hook them
together, and that will tell you
they are correctly connected.
-Make sure that the free
movement of the steering-
head in both directions is not
hindered, and that the product
never hinders or interferes
with the moving parts of the
motorbike or with the rider.
ECU GET
5
3.
Download the WiGET app
from the App Store / Google
Play on your smartphone and/
or tablet.
EN IT