Riello Hi, Comfort T300 Guía De Uso página 27

COOLING
(IF HEAT PUMP HAS BEEN CONFIGURED)
COOLING
OK
18.0
°C
USE THE ARROWS TO MODIFY
When cooling temperature adjustment is activated, the delivery
temperature value is automatically selected by the system, which
quickly adjusts the ambient temperature according to the variations
in the outdoor temperature.
If you want to change the temperature value from that automatically
calculated by the electronic board, the COOLING setpoint can be
modified within the range (-5 to +5) to obtain the required comfort
level.
DHW
The parameter assumes a different functionality based on the type
of system available:
• with a combi boiler the parameter refers to the temperature of the
instantaneous domestic water leaving the boiler.
• with a system boiler or heat pump connected to a domestic hot
water tank, the parameter refers to the temperature of the dome-
stic water stored in the tank (water tank set point).
DHW
OK
60.0
°C
USE THE ARROW TO MODIFY
WATER TANK SETPOINT
OK
58.0
°C
USE THE ARROW TO MODIFY
HEATING TEMP
OK
THE PARAMETER
WILL BE CHANGED
CANCEL
CONFIRM
CONFIRM OR DELETE SELECTION
27
WATER TANK SETPOINT
OK
THE PARAMETER WILL
BE CHANGED
CANCEL
CONFIRM
CONFIRM OR DELETE SELECTION