Riello Hi, Comfort T300 Guía De Uso página 21

When the "time schedule program" function is
enabled, these icons indicate that the heating
of the relevant zone DOES NOT follow the time
+
program. Heating is active (MANUAL mode) un-
til the next time band changes.
This icon indicates that management of a heat
pump is enabled. When the heat pump is oper-
ating, the icon flashes.
This icon indicates that management of a solar
thermal system (if present) is enabled. It flashes
when the solar panel system circulator is oper-
ating.
Boiler in function.
This always flashes if a fault is present.
This icon indicates the presence of a boiler heated with
the heat pump.
The icon appears crossed out with an "X" when
the system is operating outside the time bands
of the domestic hot water heat pump, while it
flashes when the heat pump is working to fill the
water tank.
The B in the subscript position with respect
to the water tank icon indicates that the DHW
BOOST function is enabled (electrical configu-
rations only).
This icon indicates that photovoltaic system
management is enabled; A flashing icon means
the electrical productivity of the system is ade-
quate (contact closed). The system exploits the
energy available.
21