Idiomas disponibles
Idiomas disponibles
During the setting process within PROGRAM, press PAUSE key could go back to the program select page
for reworking.
4.STOP
：
Press STOP key to stop. And can use ENTER key to switch the display "SPEED - TIME – DISTANCE / RPM
- CALIROES - WATTS" screen.
5.ENTER
：
During the setting of programs, press ENTER key to confirm and go to the next page.
6.DIRECTION
,
The direction keys are used for the increase and decrease of various values (WEIGHT, HEIGHT, AGE, SEX,
PULSE, TIME ), selection of functional modes (WATT, HRP, USER, PROGRAM, MANUAL), and increase
or decrease of resistance.
IV. Program function
Program mode: P1∼P12 PROGRAM
Press the direction keys to select P1∼P12 PROGRAM.
Press Enter to get into the target value setting page.
After press ENTER, the TIME indicator light up and the LED indicator light shines on the display of "TIME".
The initial value of "TIME" is "0:00". Press direction keys to set "TIME".
After the setting of "TIME", press ENTER, the DISTANCE indicator light up and the LED indicator light
shines on the display of "DISTANCE". The initial value of "DISTANCE" is "0.0". Press direction keys to set
"DISTANCE".
After the setting of "DISTANCE", press ENTER, the CALORIES indicator light up and the LED indicator light
shines on the display of "CALORIES". The initial value of "CALORIES" is "0". Press direction keys to set
"CALORIES".
The TIME – DISTANCE – CALORIES can be cycle setting. After the target settings of TIME, DISTANCE and
CALORIES are determined, press the key "START", and this mode starts to operate.
During the exercise, press "ENTER" to switch, fix and display "SPEED - TIME – DISTANCE / RPM -
CALORIES - WATTS" screen.
During the exercise, press "PAUSE", and the program will pause. The TIME / DISTANCE / CALORIES
display will show motion data by turns.
After pause, if you want to continue the previous exercise, press "START" and the program will continue
accumulate with the TIME/DISTANCE/CALORIES data before press pause.
Press "STOP" could stop the program, and press "STOP" again will clean the exercise date and go back to
the main program selecting page for MANUAL/ PROGRAM/ USER/ HRC/ WATTS.
Dot matrix displayed messages during exercise:
During exercise, if RPM has not been reached to 30 , screen will appear twice the rolling string of "RPM↑" for
5 seconds. After the message, if the RPM still not reach to 30, program will be paused and screen will
appear twice the rolling string of "PAUSE" for 5 seconds.
MANUAL mode
Press the direction keys to select MANUAL.
Press Enter to get into the target value setting page.
After press ENTER, the TIME indicator light up and the LED indicator light shines on the display of "TIME".
The initial value of "TIME" is "0:00". Press direction keys to set "TIME".
After the setting of "TIME", press ENTER, the DISTANCE indicator light up and the LED indicator light
shines on the display of "DISTANCE". The initial value of "DISTANCE" is "0.0". Press direction keys to set
"DISTANCE".
After the setting of "DISTANCE", press ENTER key, the CALORIES indicator light up and the LED indicator
light shines on the display of "CALORIES". The initial value of "CALORIES" is "0". Press direction keys to set
"CALORIES".
The TIME – DISTANCE – CALORIES can be cycle setting. After the target settings of TIME, DISTANCE and
CALORIES are determined, press the key "START", and this mode starts to operate.
During the exercise, press "ENTER" to switch, fix and display "SPEED - TIME – DISTANCE / RPM -
CALORIES - WATTS" screen.
During the exercise, press "PAUSE", and the program will pause. The TIME / DISTANCE / CALORIES
display will show motion data by turns.
After pause, if you want to continue the previous exercise, press "START" and the program will continue
accumulate with the TIME/DISTANCE/CALORIES data before press pause.
Press "STOP" could stop the program, and press "STOP" again will clean the exercise date and go back to
the main program selecting page for MANUAL/ PROGRAM/ USER/ HRC/ WATTS.
,
,
,
,
：
20
