Idiomas disponibles
Idiomas disponibles
GB
I. Display introduction
This is a LED display console, and the functions shown include RPM, SPEED, TIME, CALORIES,
DISTANCE, WATTS, LEVEL, and dot matrix display of PROGRAM graph.
II. Display and start-up of boot window
Standby mode:
After the console is light up, dot matrix display Metric (or British) unit "KM (or ML)" to "U1" graphic, and there
are U1 to U4 to choose from.
Sleep Mode：
When the console in the standby mode, if RPM is lower than 30 or keys no operation for 15 seconds, the
program will enter the prompt mode for 16 seconds (after 16 beeps the scale enters sleep mode). During the
timing period of 16 seconds, if RPM is higher than 30 or keys are pressed, the timing program of 16 seconds
will be canceled, and the console will go back to standby mode.
In the setting page (User setting, weight setting and settings in all programs), if RPM is lower than 30 for 10
seconds, the program will be end and jump back to standby mode. If RPM is still lower than 30 or no key
operation is detected after 5 seconds, the program will enter prompt for 16 seconds (after 16 beeps the
scale enters sleep mode). During the timing period of 16 seconds, if RPM is higher than 30 or keys are
pressed, the timing program of 16 seconds will be canceled, and the console will go back to standby mode.
When operating all the programs, if RPM has not been reached to 30, dot matrix display will show the rolling
string of "RPM↑" for 5 seconds. After that, if the RPM still not reached to 30, dot matrix display will show the
rolling string of "PAUSE" for 5 seconds.
III. Key instruction
1.START
：
Press the key (START), and the program will start the function of QUICK START directly.
2.RECOVERY
：
During the exercise, hold the hand pulse sensor until the PULSE window shows the heart rate value, and
then press RECOVERY. After press RECOVERY, the displays will stop and the TIME window will show
count down for 60 seconds. After the time count down to 0, will display will show the result of your heart rate
recovery status with F1~F6. F1 means the best level of the heart rate recovery status.
3.PAUSE
：
After the start the exercise, press PAUSE key, and the program will immediately operate the action of
"pause".
19
