Idiomas disponibles
Idiomas disponibles
ADA S7/IDS
Commissioning
Calibration
and measurement
ba75899defs01
07/2010
Commissioning, measuring, calibration
Connect the S7 plug-in connector of the pH electrode with the S7 plug of the
adapter.
Note
The further commissioning steps are given in the operating manual of the pH
electrode.
Connect the electrode to the meter.
Calibrate the electrode according to the operating manual of the meter
and observe the following rules while doing so:
Connect the adapter with the pH electrode to the meter. All further details are
given in the operating manuals of the pH electrode and meter.
Caution: Heed the depth of immersion of the pH electrode. The ADA S7/
IDS adapter must not be submersed!
Storage
For storage, leave the adapter plugged on the pH electrode if you do not
intend to use both devices otherwise. The storing method depends on the pH
electrode. More details are given in the operating manual of the pH electrode.
Commissioning, measuring, calibration
11
