Trevi RA 7F30 BT Guia Del Usuario página 11

POWER BANK
If necessary, it is possible to recharge an external device by connecting it to the
USB port:
1. Insert a charging cable into the USB socket (16) of the device, the other end of
the cable into the 5V input of the device you intend to charge.
2. Move the function selector (7) to the Bluetooth/Music position
3. Turn on the device using the volume control (4).
In power bank mode the device is able to supply 5V
Note: when used as a power bank the other functions are disabled.
TECHNICAL FEATURES
Power supply: ..............................................3.7V
..............................................rechargeable via:
..............................................USB type-C 5V
..............................................Solar panel 80mA max.
..............................................Crank dynamo
Reception range: ........................................FM 87.5 - 108.0 MHz
..............................................AM 530 - 1710 KHz
..............................................SW1 3.2 - 10.0 MHz
..............................................SW2 10.0 - 22.0 MHz
Bluetooth transmission power: ..............2.5mW
Bluetooth transmission frequency: ........2.4GHz
Dimensions: ..............................................148 x 71 x 99 mm
Weight: ..............................................440 gr.
INFORMATION ON THE REMOVAL AND DISPOSAL OF
BATTERIES
Attention: the removal and disposal operation is reserved exclusively for
specialized technical personnel!
1. Remove the screws on the battery door (6) and remove it.
2. Locate the battery and remove it.
Whatever the type of exhausted battery, it must not be thrown into household
waste, fire or water. Each type of spent battery must be recycled or disposed of at
the appropriate dedicated collection centers.
To avoid possible hearing damage, limit the time listening at
high volumes.
500mA max.
1200mAh lithium battery
1A socket
11