REF. 53948
4.
Install the kettle onto the spraying gun as
shown.
TURN OFF
1. Check that all detergent has been removed from
the system.
2. Turn off the engine.
3. Turn off the water supply.
4. Once the engine and water intake have been
disconnected, pull the trigger to depressurize the
system.
CAUTION: Never close the water intake before
turning off the engine. This could cause serious
damage to the pump and/or engine.
5. After each use, wipe the entire surface of the hi-
gh-pressure cleaner with a clean, damp cloth.
NOTE: Never disconnect the high-pressure hose from
the appliance while the system is pressurized. To de-
pressurize the system, turn off the engine, close the
water intake and press the trigger 2-3 times.
MAINTENANCE
NOZZLE CLEANING
A partially or completely blocked nozzle will cause a
significant reduction in water coming out of the nozzle
and cause the appliance to pulsate when spraying wa-
ter. To clean the nozzle:
Nozzle
• Turn off the power and unplug the device from the
wall outlet.
• Turn on the water supply. Release any pressure
that has been trapped in the hose by pressing the
trigger 2-3 times.
• Remove the lancet from the gun.
• Turn the nozzle to the thinnest spray. This opens
the fan blades.
• Insert tip cleaner, or an open paper clip, into the
nozzle hole and move it back and forth until the
debris is removed.
• Remove any remaining debris by running water
through the nozzle. To do this, place the end of the
garden hose (with the water running) on the end of
the nozzle for 30-60 seconds.
NOTE: For safety reasons, clean the appliance every
three months. Before using the appliance, check the
filter and nozzle for dirt. After use, check that there is
no water in the pump or hose.
Nozzle Tip
Cleaner
· 9 ·
STORAGE
Do not store the high-pressure cleaner outdoors or in
places where low temperatures may cause it to freeze.
Included:
• 1 spray gun
• 1 copper motor
• 1 pressure hose 8m
• 1 power cord 5m
• 1 turbo nozzle
• 1 transparent water connector
• 1 foam producer
• 1 patio cleaner
• 1 rim brush
• 1 fix brush