UFESA SF Gdansk/3D40 Manual De Instrucciones página 14

Ventilador circulador de aire
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
ning use of the appliance in a safe way and un-
derstand the hazards involved. Children should
not play with the appliance. Cleaning and user
maintenance shall not be made by children wi-
thout supervision.
• If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or
similarly qualified persons in order to avoid a ha-
zard.
• It is necessary to disconnect the appliance be-
fore assembling, disassembling and cleaning.
• This appliance is designed for use at a maxi-
mum altitude up to 2000m above sea level.
IMPORTANT INFORMATION
This appliance is intended exclusively for domestic use for the ventilation of rooms. Do
not use it for other purposes. Any other use should be considered improper and dan-
gerous. The manufacturer shall not be held responsible for any damage resulting from
improper, incorrect and irresponsible use and/or for repairs made by unqualified techni-
cians. Do not insert your fingers or any other objects through the fan's protector grille.
The appliance must be kept out of the reach of children.
Do not use the appliance if it is not working properly, or if it appears to be damaged. If in
doubt, take it to a professional, qualified technician.
Do not move the appliance while it is operating.
When the appliance is not being used, remove the plug from the mains socket. Do not
touch the appliance with wet hands or feet.
Do not drag the appliance by the cable to move it.
Do not pull the cable or the appliance itself to remove the plug from the mains socket.
To clean the appliance, follow the instructions in the manual in the section dedicated to
cleaning and maintenance.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to
people, animals or objects as a result of failure to observe the aforementioned warnings.
REMOTE CONTROL BATTERY INSTALLATION
1. With the help of a semicircular thin object, turn the battery cover to the unlocked
position as in the below picture:
14
loading