VII. Installation method
*Installation method of casters:
1. Invert the electrical oil heater
with bottom up.
2. Fix the caster board on the
electrical oil heater body with
waterfall holders.
VIII. Precautions
1. It is strictly forbidden to cover
the venting holes, and the
machine is strictly protected
from water ingress. Clothing
should not be baked directly on
the electrical oil heater to
prevent fire.
2. The heater should be filled
with special oil. If the oil
container needs to be opened
during repairs, the work can
only be done by the
manufacturer. If leakage occurs,
contact the after-sales service
agent of the manufacturer.
3. The discarding of equipment
should comply with the relevant
regulations of oil discharge.
4. The heater shall not be
directly placed under the power
socket for use, and reliable
grounding wires and special
sockets must be installed.
08
3. Install the casters on the
baseboard.
4. After installation, turn the
electrical oil heater over with
casters on the ground and rest
it for 3 to 5 minutes before use.
5. When the heater is not under
guard, or when you finish using
it, go out or do not use it for a
long time, turn off the power
switch first, and then unplug the
power plug.
6. Clean and maintain after first
pulling out the power plug and
waiting for the body to cool.
7. If the flexible wire of the
power supply is damaged, in
order to avoid danger, it must
be replaced by the professional,
maintenance department or
similar department.
8. The electrical oil heater must
be placed on a flat surface for
use.
9. When the heater is working,
it is strictly forbidden to touch its
body to prevent high
temperature burns; please pay
special attention to children.
10. It is forbidden to switch on
and off the heater by plugging
and unplugging power cord plug
instead of power switch.
11. Do not operate the heater
switch or unplug the power cord
plug with wet hands to prevent
electric shock.
12. There is no comprehensive
protection for children or
persons with disabilities in the
electrical oil heater; children
should be supervised to ensure
that they do not play with the
heater.
13. This product is only suitable
for indoor use and is forbidden
to be used outside.
14. Do not bend, pull or tangle
the power cord to prevent it
from overheating.
15. Please do not turn on the
power supply before the
machine is assembled to avoid
accidents.
16. This product is not suitable
for people with physical,
sensory or intellectual
deficiencies or those who lack
experience and common sense.
17. Unplug the power plug
before moving, and move the
machine after cooling. Care
must be taken when moving.
Do not pull the power cord
directly to move the machine.
18. This product should not be
placed next to curtains and
indoor furniture, but should be
placed more than 3.3ft away
from the wall and furniture and
where there is no cover within
3.3ft of its top to facilitate air
circulation.
19. Do not use or store it in a
humid and dusty place for a
long time to avoid accidents
such as corrosion of the outer
casing or leakage and
inductance due to moisture.
20. Do not disassemble the
machine at will, and do not
modify the product in any way
to avoid danger.
21. Pull out the power cord from
the power cord box before
turning on the power. It is
normal for the product to have a
slight sound and odor during
heating.
22. Do not use water to rinse
the machine and do not drop
water into the heater cover.
23. Do not hang the power cord
on the surface of the heater's
heat sinks to prevent burns.
24. If the heater is covered or
improperly placed, it can cause
fire. Therefore, it is not allowed
to use the heater with a
programmer, timer or any other
device that can automatically
turn on the power.
25.
No covering warning: to
avoid overheating, do not cover
the heater.
26. Do not use this heater
around bathtubs, sprinkle heads
or swimming pools.
09
