Kenmore ELITE Oasis HE 110.2706 Serie Manual De Uso Y Cuidado página 24

Cycle did not run Staintreat Option
Did you select the Staintreat option?
The Staintreat option must be selected for it to be included in
a wash cycle. The Staintreat option should be started on a
dry load only. Staintreat should not be selected after the tub
has started filling with water.
• The Staintreat option is a default option in the Heavy Duty
cycle and may be added to other cycles. It is not available in
Bulky/Bedding,
Rinse & Spin or Drain & Spin.
Garment damage
• Checkthe following:
Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before
washing.
Were strings and sashes tied to avoid tangling?
Were items damaged before washing? Mend rips and broken
threads in seams before washing.
Did you overload the washer?
See "Starting Your Washer" for maximum load size.
Did you properly add chlorine bleach?
Do not pour chlorine bleach directly on load. Use your liquid
chlorine bleach dispenser. Wipe up bleach spills. Undiluted
bleach will damage fabrics. Do not place load items on top of
the bleach dispenser when loading and unloading the washer.
Did you follow the garment manufacturer's care label
instructions?
Wash temperature is not what I picked
• Are the hot and cold water inlet hoses reversed? Check
the hoses.
• Does the wash water temperature feel lower than usual?
As washing progresses, the wash temperature will decrease
slightly for hot and warm washes. This is normal.
To reduce wrinkling, the warm rinse is regulated to be cooler
than the warm wash.
Did you select Save Energy Plus?
The Save Energy Plus option reduces wash and rinse water
temperatures to save energy. This option must be selected
prior to the start of the cycle. Save Energy Plus is only
available in the Heavy Duty and Whitest Whites cycles.
Water remaining in bottom of dispenser
• Did the dispenser drain properly?
A small amount of water will be left in the dispenser at the
end of the cycle. This is normal.
24