Socket Mobile DuraScan 800 Serie Manual De Usuario página 5

1. Insert scanner into Charging Dock, 6 Bay Charger or Charging Adapter.
• Bundles available for Charging Dock and 6 Bay Charger.
2. Insert USB or plug into wall port.
3. The scanner will beep twice indicating adequate power is being supplied to
the unit.
Charging
Adapter
Note: The scanner comes with a pre-installed rechargeable Lithium Ion battery,
the initial full charging of the battery can take up to 8 hours.
Power On
Press and hold down the small power button on the side until the scanner
beeps twice (low-high tone).
Charge the Battery
8 Hours
Charging Dock
Side LED status
• Red = Charging
• Green = Fully charged
5
6 Bay Charger
Due to varying countries' outlets,
the 6 Bay Charger power cords
differ per region.