Beurer FT 95 Instrucciones De Uso página 43

Insert the batteries or press and hold the LIGHT/SET but-
ton for 3 seconds when the thermometer is switched on.
The temperature measurement unit flashes on the display
(Fig. 1).
You can set the device to display the measurements in de-
grees Celsius (°C) or degrees Fahrenheit (°F).
• To display the measurements in Celsius, select °C using
the MODE/MEM button and confirm with the LIGHT/
SET button.
• To display the measurements in Fahrenheit, select °F
using the MODE/MEM button and confirm with the
LIGHT/SET button.
The time format flashes on the display (Fig. 2).
• Use the MODE/MEM button to set your preferred time
format, and confirm with the LIGHT/SET button.
Fig. 1
Fig. 2
43