Kenmore 253. Guía Para Su Uso Y Cuidado página 14

11.Place original
washer ( some
models) o verhole
[nrefrigerator door
andlineupholein
center h inge
insert
hinge pin through
both holes, Place
washer (some
models) on hinge
pin, then position
freezer door on
center hinge,
12. Remove plug from
upper bearing of door
and reinstaEIon
opposite side
13. Assemble upper
hinge to top of cabinet
a_d door, Use opposite
set of holes. Do not
completely tighten
screws
Align doors so there is a
parallel gap between
doors, Original shipping
block may be used to
align doors Adjust doors
to cabinet so gaskets seal
but do not bind Tighten
upper and lower hinge screws
Additional adjustment may be necessaryafter _oadingthe door
shelves_Ret_Jrn food, bottles, and other articles to doors, Turn
the refrigerator control on and to the previous setting.
Wait 24 hours for the temperature to stabilize before
making additional changes.
Refer to the Toe Grille Instructions on page 15 to replace the
Toe Grille (some models).
14