Idiomas disponibles
Idiomas disponibles
RT600 Engine temperature alarm SEYMO
English
With the temperature control SEYMO © know in real time the
degrees to which your engine is working. You can also set a
maximum temperature value, beyond which the device sounds
an audible and visual. By controlling temperature SEYMO © will
ensure that your engine is operating in the best conditions and
prevent any possible overheating extend.
Place the programmed digital display temperature control SEYMO
© in a conspicuous place near the command post. Remove the
back cover of the digital display and connect the 12V with a 1 amp
fuse, and probe. The probe cable must be installed in the engine
block, as close to the cylinder head. It has a perforated end to
facilitate attachment to the motor by screws.
Take special care when the rest of the cable guide to prevent
contact with other parts of the engine.
important not to pull the terminal (port) for the cable could
damage the probe
Configuración
Pushbutton on / off. Press once to turn. Press and hold 3
seconds to turn off.
Available memory will remain on or off when power is turned
Configuration button. Press once to change the maximum
temperature at which the alarm is activated. When the desired
value, press once to confirm or wait 3 seconds, in both cases will
save the alarm.
Adjustment buttons. In configuration mode (when you press
Set) select Up / Down to change the value of the temperature
warning until 110C ◦. The alarm is activated when the probe
detects a temperature at least above 1C ◦.
WARRANTY
Our products are guaranteed against any manufacturing defects or faulty materials for a period of 2 years from date of purchase.
In that case, any defect in the normal use of the product during the warranty period proveedor.no Contact may be applied in case
of misuse, faulty wiring or handling by the buyer. The scope of this warranty is limited to repair of the instrument it any other
liability that may claimed from damage caused by incidents or because of product malfunction.
