Fanimation SHOWROOM Serie Manual Del Usuario página 9

How to Assemble Your Ceiling Fan Blades
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
1. Slide blades through slots in motor assembly and
attach to the motor hub using the 3/16˝-24 truss head
screw with spring washer/flat washer. Make sure the
screws securing the blades to the motor hub are tight
and are properly seated. (Figure 1)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
1. Remove one of the three screws in the support
bracket at the bottom of the motor assembly. Retain
the screw for later and slightly loosen the remaining
two screws. (Figure 1)
2.
Assemble the housing assembly to the support
bracket using the two key slots in the housing
assembly. Replace the previously removed screw
and securely tighten all three screws. (Figure 2)
How to Assemble Your Light Kit
Blade
3/16˝-24 Truss
Head Screw with
Spring Washer/
Flat Washer
(3 each per blade)
3/16˝-24
Truss Head Screw
with Spring Washer/
Flat Washer
9
Figure 1
HARDWARE USED:
Motor Assembly
Figure 1
Housing Assembly
Figure 2
Motor Assembly
x 9