Idiomas disponibles
Idiomas disponibles
OPERATION - General information
The following description is associated with the image on page 2:
1. Housing
2. Baking trays
3. Indicator light "heating up"
1.
Unpack the device and remove all packaging parts.
2.
Clean the baking tray before using for the first time (see 'Cleaning and maintenance').
3.
Plug in the power cord and let the appliance heat for 5 minutes. This will remove any packaging odor
from the device.
PLEASE NOTE:
•
The first time you use the appliance, it may produce slight smoke and a specific odour. This is normal
and will disappear on its own. Ensure sufficient ventilation.
•
Keep birds away from the appliance when the appliance is in operation. When heating the non-stick
coating on the baking tray, a substance can be released that is a nuisance to birds.
Preheating
1.
Place the appliance on a flat, level surface.
2.
This appliance must be connected to an earthed socket.
3.
Plug the power cord into the wall outlet. The indicator lights come on and the appliance heats up.
4.
Wait for the green indicator light to turn off. The baking trays are then at the right temperature and the
donut maker is ready for use.
Baking donuts
1.
Prepare the batter according to the recipe on the batter packaging.
2.
Preheat the appliance as described in 'Preheating'.
3.
Grease both baking trays. Use a brush to spread the oil or butter.
4.
Use a little round spoon to pour a small amount of batter in each hole of the lower plate. Be sure the
batter does not exceed the brim.
5.
Bake the donuts until they are the desired colour.
6.
Open the appliance when the donuts are ready.
7.
Carefully remove the donuts with a heat resistant wooden or plastic spatula so as not to damage the
non-stick coating.
8.
When you have finished baking the donuts, unplug the appliance and open the appliance to allow the
baking trays to cool.
PLEASE NOTE:
•
Normal cooking time is approximately 3 - 5 minutes. This depends on the batter used and your
personal taste. Leave the appliance closed while baking because opening it during use can adversely
affect the appearance of the donuts.
•
Do not use sharp forks or knives!
CLEANING AND MAINTENANCE
Clean the device after each use.
1.
Disconnect from mains power supply and let the appliance cool down.
2.
Clean the baking plates with a damp cloth, if necessary with an additional couple of drops of washing-
up liquid. Make sure no traces of detergent remain on the plates.
3.
Dry the device thoroughly after cleaning.
4.
Store the donut maker.
PLEASE NOTE:
•
Do not use aggressive or abrasive cleaning agents or sharp objects (such as knives or hard brushes)
when cleaning.
4. Indicator light "switched on"
5. Handle
6. Safety clip
14
14
EN
EN
