Bosch 0 603 9B3 001 Manual Original página 13

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
OBJ_BUCH-2792-002.book Page 13 Thursday, August 25, 2016 11:14 AM
tact hidden wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
 Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
Protect the power tool against heat, e. g.,
against continuous intense sunlight, fire, wa-
ter, and moisture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Safety Warnings for Battery Chargers
This charger is not intended for use
by children and persons with phy-
sical, sensory or mental limitations
or a lack of experience or know-
ledge. This charger can be used by
children aged 8 and above and by
persons who have physical, senso-
ry or mental limitations or a lack of
experience or knowledge if a per-
son responsible for their safety su-
pervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Only charge Bosch lithium-ion
batteries with a capacity of 1.5 Ah
or more (3 battery cells or more).
Bosch Power Tools
The battery voltage must match
the battery charging voltage of the
charger. Do not charge non-re-
chargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Charge the power tool only with the supplied charger.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Intended Use
The machine is intended for driving in and loosening screws.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Keyless chuck
2 Indicator for right rotation
3 Indicator for left rotation
English | 13
1 609 92A 3GK | (25.8.16)
loading

Este manual también es adecuado para:

Easydrill 12