Idiomas disponibles
Idiomas disponibles
Electrical Connections
Cautions:
o This product is designed to operate of a 12 V DC, negative ground battery system.
o To prevent damage to the unit, be sure to follow the connection diagram below.
o Remove approximately '/4 (5 mm) of protective covering from the ends of the leads before connecting.
o Do not insert the power connector into the unit until the wiring is completed.
o Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all
cables and keep cable terminals free from touching any metal parts.
o All other installation methods require the use of dedicated metal fittings. Consult with a qualified servic-
ing engineer or your dealer if other methods are required.
C1 Wiring Diagram
(White) Door switch lead
To the switching door trigger
(Black) Wire at room light.
Room light ground lead
Room light electrical lead
Connect to the cord which was
originally connected.
Consult your nearest
—? professional installer.
Room light power lead
TH Power socket
@ Display unit
ACC power lead
To ACC power, +12 V DC.
Ground lead
To a clean, bare metallic part
of the car chassis.
Remote control signal
receiver lead
To the REMOTE-IN terminal
of the Panasonic DVD player
(CX-DV700U).
VTR1 input lead
To the audio/video output
connector of the other
device.
REMOTE-OUT
o"REMOTE-QUT"
is
exclusively
used for VTR1.
Notes:
o Be sure to fully plug in the connector.
o When game devices are connected, the image may be unstable.
GANTO
eS
Ê 20-
