Beta 1850E Instrucciones página 7

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
OPERATING MANUAL AND INSTRUCTIONS FOR HEAT GUN MANUFACTURED BY:
BETA UTENSILI S.P.A.
VIA A. VOLTA 18,
20845, SOVICO (MB)
ITALIA
ORIGINAL DOCUMENTATION DRAWN UP IN ITALIAN.
CAUTION
Store the safety instructions with care and hand them over to the user.
PURPOSE OF USE
The hot air gun can be used for the following purposes:
• heat shrinking;
• stripping paint, softening PVC parts;
• soldering, welding;
• shrinking cables;
• thawing, drying, disinfecting;
• treating glued parts.
The hot air gun must not be used for the following operations:
• don't use on people or animals;
• don't use as a hairdryer;
• don't use in environments containing potentially explosive atmospheres;
• don't use in damp or wet environments; exposure to rain or snow;
• don't use at any voltages other than those stated in the TECHNICAL DATA table;
• don't use for any applications other than stated ones.
WORK AREA SAFETY
Do not operate the heat gun in environments containing potentially explosive atmospheres,
because sparks may be generated which can ignite the dust or fumes.
Avoid contact between the metal blowpipe and live equipment, as electric shocks may be caused.
Danger of burns: the air flow comes out of the heat gun at a high temperature.
Beware of the direction of the air flow.
Keep children and bystanders away from your workplace while operating the heat gun.
Do not use the heat gun near flammable material.
Make sure the workplace is properly ventilated.
HEAT GUT 1850E
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING THE
HEAT GUN. FAILURE TO COMPLY WITH THE SAFETY STANDARDS AND
OPERATING INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.
EN I
7