Filling Clean Water Tank
Press the Clean Water Tank release button
to remove CWT from the appliance.
Place the tank back into the appliance. You
should hear a "click" if done correctly.
Charging Instructions
Warning:
• Only charge the appliance with the charger supplied by Tineco.
• During long periods of not being used, the appliance must be charged once every 3 months for
optimal performance. It may take 4-5 hours for a full charge.
• Store indoors in a dry place. Do not expose the appliance to sunlight or freezing temperatures.
Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).
②
①
Open the tank cap, and fill the tank with tap water
to the Max line. When deep cleaning is necessary,
add one bottle cap of solution to the CWT and
tightly close the cap.
Note:
Only use water under 140°F/60°C.
DO NOT USE HOT WATER.
• To charge the appliance, plug in the drying &
charging dock and place the appliance on it.
• To avoid tripping hazards, please place the
appliance on the charging dock near a wall
during charging.
47
MAX