Idiomas disponibles
Idiomas disponibles
ENGLISH
single touch, the blender will start working. To operate the blender hands-free, simply
attach the cup to the base by turning it clockwise. The blender will stop when you stop
pressing the cup against the base or when you unlock it from the base. Turn the bottle
upside down and place it on a flat surface.
3. Replace the blade assembly with the cap.
WARNING: avoid touching the sharp blades. If the blades get stuck, unplug the appliance and
remove the ingredients that are blocking the blades with a spatula.
WARNING: do not fill the cup above the MAX mark.
WARNING: never fill the cup with hot ingredients that are hotter than 60 ℃.
WARNING: do not let the blender run for more than 1 minute each time you use it. If, after 1
minute, the ingredients are still not fully blended, switch off the blender and wait another
minute before continuing to use it.
Cooling tubes
The cooling tubes are used to maintain the mixture at a low temperature after blending. To
use them, follow the instructions below:
1. Fill the cooling tubes with water, close them and let them in the freezer for 12 to 24 hours.
NOTE: do not fill them to the top, as the expansion of the ice could cause them to break.
2. Rotate the cup to unlock it and remove it from the base. Unscrew the blade assembly,
screw the cooling tube into the cap and close the cup again using the cap.
NOTE: to attach the cooling tube to the cap, press against the inside of the cap and twist
without excessive force. Fig. 2
4. CLEANING AND MAINTENANCE
For ease of cleaning, we recommend that you clean the cup and blades immediately after
use. Do not use abrasive products, scouring pads or alcohol to clean the appliance. Never
immerse the blender base in water or wash it in the dishwasher.
1. Unplug the appliance and remove the detachable parts.
2. Wash the parts with lukewarm water and a little detergent and rinse them thoroughly
under running water. You can also wash the cup in the dishwasher.
36
POWER TITANIUM 300 _ POWER TITANIUM 300 EASYGO
