Idiomas disponibles
Idiomas disponibles
USE
Cooling Mode
In this mode, the exhaust hose must be connected to the outside of the home.
1 - Press the
button on the control panel or on the remote control to turn on the device
2 - Press button
on the control panel or remote control several times to light up LED
3 - Adjust the setpoint temperature (desired temperature) using buttons
4 - Press the
button several times to set the fan speed .
Dehumidification mode
In this mode, the continuous drainage pipe must be connected to drain the water into a container or to
the sewage system..
1 - Press the
button on the control panel or on the remote control to turn on the device
2 - Press button
on the control panel or remote control several times to light up LED
Fan speed and temperature adjustment are not available in Dehumidification mode.
Fan mode
1 - Press the
button on the control panel or on the remote control to turn on the device
2 - Press button
on the control panel or remote control several times to light up LED
3 - Press the
button several times to set the fan speed .
Heating Mode
1 - Press the
button on the control panel or on the remote control to turn on the device
2 - Press button
on the control panel or remote control several times to light up LED
3 - Adjust the setpoint temperature (desired temperature) using buttons
4 - Press the
button several times to set the fan speed .
Automatic Mode (Auto)
In this mode, the device automatically determines the settings necessary to reach the set temperature.
1 - Press the
button on the control panel or on the remote control to turn on the device
2 - Press button
on the control panel or remote control several times to light up LED
3 - Adjust the setpoint temperature (desired temperature) using buttons
and
and
and
53
.
.
.
.
EN
