Cleaning The Mower And Charging Station; Important - Toro Haven Robotic 3000 m2 Manual De Instrucciones

Cleaning the Mower and Charging Station

Do not pressure-wash the mower; the water can damage the electronics.
Use compressed air when cleaning the mower.
Clean the charging port on the mower and/or charging station using a non-
conductive tool (cloth or soft brush); otherwise, damage may occur.
If metal objects contact the positive and negative posts at the same time, this could
short out the battery pack. The battery pack or conductor could overheat and burn
you, resulting in minor or moderate injury.
Do not use metal objects to clean around the battery.
1. Turn the mower power switch to the O
2. Unplug the power supply for the charging station.
3. Turn the mower over.
Maintenance: Cleaning the Mower and Charging Station

IMPORTANT

IMPORTANT
CAUTION
position and wait for all moving parts to stop.
FF
Page 6–9 3448-238 C