Replacing Oven Burner Pilot Light Nozzle - Angelo Po 04WFAAV Manual De Uso E Instalación

REPLACING OVEN BURNER PILOT LIGHT NOZZLE

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
panels (B).
4 - Remove the pipe (D).
5 - Remove the nozzle (E) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
6 - Replace the pipe (D), the control panels (B) and
the control knobs (A).
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by skilled
operatives in compliance with the legal re-
quirements with regard to safety at work. Nev-
er dump non-biodegradable
lubricating oils and non-metallic components
A
(rubber, PVC, resins, etc.) in the environ-
ment. Dispose of them in accordance
with the relevant legal requirements.
materials,
- 19 -
C D
C B
E
10
IDM-39610802400.tif
IT
GB
DE
FR
ES
English