Idiomas disponibles
Idiomas disponibles
■ Instructions for use
1. Switching the Heat Pump on/off
Press the
button to switch the Heat Pump on/off.
When the device is in operation, the current water temperature is displayed, the time is displayed
and the mode of operation.
If it is in standby mode, the current water temperature is displayed, as well as the text "stby".
2. To set the Water Temperature.
When the device is in operation, press
Press
or
to change the value.
Wait 10s or press the
3. Changing the Operating Mode
When the Pump is in operation, from the home page, press the
operation.
You have 3 Operating Modes AUTOMATIC, HEAT PUMP, Support.
Heat pump mode: Only the sanitary production by the heat pump 28℃-65℃.
Auto mode: Sanitary production by the heat pump up to 60℃, beyond the commissioning of the
electrical resistance 28℃–75℃.
Assistance mode (AI): Sanitary production only by electrical resistance, temperature range 28℃-
75℃.
4. "Timer" activation on/off
You have 3 buttons
Just set the "timer on", there is no "timer off", the pump will stop as soon as the set temperature
is reached.
If the pump is in standby mode, press one of the three buttons
settings menu.
The screen displays "OP", The time zone displays the start time.
Press
or
After setting the time, press the "Timer" button again to validate and return to the home page.
When the Heat Pump is in "Standby" mode, Press the "Timer" buttons
"Timer" mode and Stop it.
Note: By default, the " Timer1" is set for 05:00, the "Timer2" for 10:00, and the "Timer3" for
17:00.
5. Setting the time and the week.
button for 3s to save the value and return to the home screen.
on the control panel, they are used to activate the "timer".
to change the time setting, duration variable by 30 minutes.
or
to enter the settings page
button to validate the mode of
for 3s to enter the
to change the
