Idiomas disponibles
Idiomas disponibles
Part 2: Precautions for use
● Be sure to install a safety valve on the cold water inlet during installation.
● Remove the plug from the condensation water outlet and keep it unlocked before using the
thermodynamic water heater.
● Once the installation is complete, check again that the water heater tank is filled with water
before powering the water heater.
● Before using the appliance, ensure that a PPR connection pipe with a maximum length of 1.5
m has been installed at the water inlet.
■ Please check if the following accessories are provided.
Accessories
User manual
Safety valve
Connection cable of
photovoltaic inverter
Drain hose
Drain connection
Note:
If the list of accessories is updated according to the improvement of the products, there will be no other
instructions. So please refer to the current list of accessories.
Fig.2 Working principles of electricity-assistant heating
QTY
Photos
1
1
1
1
1
Description
To be used during installation and use
To be installed during installation
To be used to connect the inverters
Connect to the drainage connector
Connection to the drainage port of the
device
