Idiomas disponibles
Idiomas disponibles
ENG
c) To use a predefined mode or to use one of the two programmable modes (Pr8 and Pr9) press
the [Stand-By / ON] key and exit stand-by mode, press the [Prog] key until symbol appears in
the display. At the top of the display the program in use is displayed (from P1 to P9), programs
are selected by pressing the [Crono] key, in the external part of the display you can see, for each
program, the time operation bars of the indicated program.
BOOST 2H MODE
The "2h boost" mode can be used to quickly heat the room or speed up the drying of the wipes.
- Press the [Prog] key until the "2h" icon appears on the display.
The appliance is switched on at maximum power for 2 hours, up to a temperature of 30°C. The "2h
boost" mode is set to automatically stop after a period of 2 hours and return to the previously set ope-
rating mode.
If necessary, the user can return to other modes at any time by simply pressing the [Prog] key.
OPEN WINDOW FUNCTION
The device allows to detect the presence of an open window to limit the energy consumption, to acti-
vate this mode, activate the Stand-by mode, press the [Chrono] key for more than 3 seconds, scroll the
modes with the key [+] and select FUNC with the [Prog] key, the window icon will flash in the upper left
of the display, using the [+] key select ON / OFF, visible in the center of the display, and confirm with
[Prog] .
The icon will be active during the thermostat operation, if the open window is detected, the icon will be
flashing and the system will turn off the heating for a maximum of 30 minutes or until a temperature
increase of at least 1,5°C.
ASC FUNCTION
This functiom allows you to optimize the operating times of the device, in order to limit consumption, by
activating this mode the device will record the time necessary to bring a specific room to the set tem-
perature, adjusting its operation automatically, in this way thermostat can be activated after time setted
if is possible to reach the desired temperature in less time than that foreseen by the operating time
intervals that have been set. activate Stand-by mode, press the [Crono] key for more than 5 seconds,
scroll through the modes with the [+] key and select FUNC with the [Prog] key, press it until the icon
appears on the upper part of the screen, select ON with the [+] key and press [Prog] again to confirm.
After a few seconds, the remote control automatically returns to Stand-By mode.
ECO MODE
This mode allows you to limit electric consumption by lowering the set comfort temperature by 3 de-
grees, by activating this mode the device operates maintaining a temperature corresponding to (Setted
Temperature - 3°C). activate the Standby mode, press the [Chrono] key for more than 5 seconds, scroll
the modes with the [+] key and select FUNC with the [Prog] key and press it until the icon appears,
select ON with the [+] key and press [Prog] again to confirm. After a few seconds, the remote control
automatically returns to Stand-By mode.
KEYS LOCK
This feature allows the user to lock the keypad to prevent accidental changes. All buttons on the re-
mote control are locked. To activate the key lock function, press [Prog] for 5 seconds.To deactivate the
function, repeat the procedure.
22
