noken TERRA 100341841 Manual página 21

Idiomas disponibles

Idiomas disponibles

3.- OPERATIVE MODE
On/Stand-By
Fil - Pilote
Press [Prog] mode to enter in every operative mode (see below)
COMFORT MODE
The "Comfort" mode allows you to maintain the set room temperature. To set this mode:
- Press the [Prog] key until the "Comfort" mode icon appears on the display.
- Set the desired temperature with the [+] and [-] buttons.
NIGHT MODE
In "Night" mode, a temperature lower than the "Comfort" temperature is set. We recommend using this
mode at night or when the room is not used for 2 hours or more.
- Press the [Prog] key until the "Night" icon appears on the display.
- Set the desired temperature with the [+] and [-] buttons.
ANTIFREEZE MODE
In the "Antifreeze" mode the temperature is set at 7°C. The appliance activates the heating element
when the room temperature drops below 7°C.
We recommend using this mode when the room is not used for several days.
- Press the [Prog] key until the "Antifreeze" icon appears on the display.
CHRONO MODE
Chrono mode programmation
a) Set the current day and time
- Activate the "Stand-by" mode and press the [Chrono] key for more than 5 seconds.
- The display will show the words: "Time''
- Press the [Prog] key to enter the mode.
- Set the current year with the [+] and [-] keys.
- Press the [Prog] button again to confirm.
Set the current month with the [+] and [-] keys.
- Press the [Prog] button again to confirm. Set the current day with the [+] and [-] keys.
- Press the [Prog] button again to confirm.
The display now shows the current time to be confirmed
'Hours': use the [+] and [-] keys to set the time and confirm with the [Prog] key.
'Minutes': repeat the same procedure and confirm with the [Prog] key.
- At the end the thermostat returns to "Stand-by" mode.
b) Set the program for the Crono mode:
- Enter "Stand-by" mode and press the [Chrono] key for more than 5 seconds.
- At the top of the display you will see the words: "Time"
- To set the time sequence of the "Chrono" mode, press the [+] key until that the words Pr8 or
Pr9 (Programming) appear on the display.
- Press the [Prog] key to enter the mode.
Now a time sequence can be set for each day of the week.
Starting with day 1, select the desired sequence with the keys [+] and [-] to select, for each
hour,between the "Comfort" temperature (full bar) button [+] and the "Night" temperature (emp-
ty bar) [-] key.
Press [Prog] to confirm the first day setting, repeat the same procedure for the remaining 6
days of the week.
Comfort
Night
Antifreeze
Chrono
ENG
2h
Boost
21
loading

Este manual también es adecuado para:

Terra 100341842