Idiomas disponibles
Idiomas disponibles
CHARGING THE APPLIANCE
• Ensure that the appliance is completely dry.
• Ensure that the appliance is off, or turn it off at the
OFF switch B (fig. 1).
This appliance can be used on battery power or connected directly to
the mains power supply.
the power supply.
Do not recharge the appliance if the ambient temperature is below
32 °F or above 104 °F.
Recharge the appliance the first time it is used and whenever the B LED (fig. 1) starts
flashing, indicating that the appliance is running low.
The trimmer will beep to notify you when the battery power level is
low. When there is 10% battery power left the unit will beep once.
When there is 5% battery power left the unit will beep twice. When
there is 2% battery power left the trimmer will beep 3 times
The appliance can be charged using the adapter F (fig. 1) connected directly to the
appliance, or using the charger base I (fig. 1) or using the mini USB cable E (fig. 1)
1) Direct connection: connect adaptor connector F (fig. 1) to the port at the bottom
of the appliance C (fig. 1).
2) Connection through base: insert the appliance into the base I (fig. 1) and the
power adaptor F (fig. 1) into the port at the bottom of the base.
3) In both cases, connect the other end of the power adapter to the mains power
supply.
4) During charging the LED of the appliance B (fig. 1) will flash. When charging is
completed, the LED will be fixed.
If it is not possible to connect the adapter to a compliant RTA socket, the appliance
can be charged using the supplied mini USB cable E (fig. 1), connected to a suitable
power source. The charging time using the mini USB cable will be longer.
Fully charge the appliance at least once a year.
USE
ATTENTION! Do not use the appliance if the blades of the heads A (fig.1)
are damaged or if the blade block is not working correctly.
Do not use the appliance on wet hair.
6
®
