Assembly Of The Actuator [Specialist]; Actuator Sr2 - Dn 20 / Sr5 - Dn 25 + Dn 32 / Sr10 - Dn 40 + Dn 50 - PAW 999608x-mub-ml Manual De Instrucciones

4.1

Assembly of the actuator [specialist]

4.1.1 Actuator SR2 - DN 20 / SR5 – DN 25 + DN 32 / SR10 - DN 40 + DN 50
blue
When the actuator is
activated, it turns 90°
in clockwise direction!
16
1. Set the actuator to
manual mode by turning
the selector switch. Only
in the manual mode, the
lever of the actuator can
be manually adjusted.
2. Turn the adjusting lever
to the left into the
position „blue".
3. Turn the rotary knob of
the 3-way valve such that
the nose points
downwards or to the
left to .
4. Turn the actuator as
shown on the figure and
mount it to the
3-way valve.
5. Connect the actuator
to the controller.
6. Set the automatic
mode on the actuator.
The actuator is ready for
operation.
999608x-mub-ml – V10
4 Assembly and installation [specialist]
blue
When the actuator is activated,
it turns 90° in clockwise
direction!
2020/04