Idiomas disponibles
Idiomas disponibles
STEP 7
7-1. Bring up the tank housing and rest it
on the post plate.
7-2. Connect the regulator to the gas
tank and tighten it with adjustable
wrench.
7-3. Connect the end thread of inlet gas
hose to the regulator. 7-4. Put LPG gas
tank on the stand.
7-5. Hook the chain on the 2 sides panel
hole.
5. USE OF GAS ON THE OUTDOOR STOVE
GAS REQUIREMENTS
Use propane or butane gas only.
The pressure regulator and hose assembly to be used must
conform to local standard codes.
The installation must conform to local codes, or in the
absence of local codes, with the standard for the storage and
handling of liquid petroleum gases.
A dented, rusted or damaged propane tank may be hazardous
and should be checked by your tank supplier. Never use a
propane tank with a damaged valve connection.
The propane tank must be arranged to provide for vapor
withdrawal from the operating cylinder. Never connect an
unregulated propane tank to the heater.
Regulator outlet pressure should meet the corresponding gas
category in the table of injector.
The appliance requires approved hose in 1.2m length.
34
