Idiomas disponibles
Idiomas disponibles
3. ALLOCATION
The heater is primarily for outdoor use only. Always ensure
that adequate fresh air ventilation is provided.
Always maintain proper clearance to combustible materials,
i.e. top 100 cm and sides 100 cm minimum.
Heater must be placed on level firm ground.
Never operate heater in an explosive atmosphere like in areas
where gasoline or other flammable liquids or vapors are
stored.
To protect heater from strong wind, anchor the base securely
to the ground with screws.
4. ASSEMBLY
Tools needed:
Open end wrench 10 & 13 mm
Adjustable opening wrench (2) 20 cm long Slip joint pliers 23
cm long
Philips screwdriver w/ medium blade
Spray bottle of soap solution for leakage test
Parts supplied:
Stand with LPG cylinder housing and 3 post brackets.
9 Cup Nuts (M6 mm),9 Small Screws (M6 x 8 mm) for
Reflector Assembly. 6 Large Bolts and Flange Nuts (M6) for
Support Legs/Main Pole Assembly.
4 Bolts (M6x30mm) and 4 Flange Nuts M6 for support post
Assembly. 4 Bolts (M6x12mm) for table and tank housing.
Chains for the tank housing.
30
