Idiomas disponibles
Idiomas disponibles
AUTO MODE (CHARGING STAND)
If you have purchased the Socket Mobile Charging Stand, the
D600 can both charge and read stationary in Auto Mode.
1. Pair and connect the D600 to your device prior to placing the
reader in Auto Mode. The reader is not discoverable when in Auto
Mode and in the Stand. This facilitates a fast
connection to the current connected device when powered on (for
example the start of the new business day).
2. The Trigger button must be pressed to disable Auto Mode (and en-
able Mobile Mode) after the reader is removed from the Stand.
3. The reader will not turn off when its in Auto Mode and in the
Stand under AC Power.
4. To avoid excessive power drain, the reader should not be left out of
the Stand in Auto Mode. Either press the trigger button or power
the reader off.
Auto Mode (In the Stand)
Action
Place Reader in
Reader switches
the Stand
to Auto Mode
Place an RFID tag
Initiate Read
in the Reader's
operation
Field of View
Mobile Mode (Not in the Stand)
Action
Remove the
Reader switches
Reader from
to Mobile Mode
the Stand and
press the Trigger
button
Press the Trigger
Initiate Read
button
operation
Behavior
Beep Pattern
High-high tone confirms
proper seating*
1 Beep when Data
successfully reads
Behavior
Beep Pattern
None
1 Beep when
Data successfully
read
Notification
Light Activity
Battery Status
Light is Disabled
Green Light
blinks (while
reading)
Notification
Light Activity
Battery Status
Enabled
Light is Enabled
Green Light
Vibrate when
blinks (while
Data successfully
reading)
read
Vibrate
None
None
Vibrate
17
