Costway TQ10151 Manual página 4

First, remove the nuts and gaskets at the wheel at the bottom of
the body. Second, arrange the wheels, gaskets, nuts and wheel
covers according to the position shown in the diagram and fix
them.
a
a. Insert the steering rod into the round hole of the front body and
pass through the round hole of the dashboard.
b. First, remove the 2 screws at the rear bottom of the body, and
then fix the anti-rollover device to the corresponding position with
screws.
3a
06
b
a. First, remove the screws and nuts from the steering wheel
connector. Second, connect the armrest to the steering wheel
connector. Then the body connecting wires through the steering
wheel connecting piece, and the steering wheel connecting line
docking. Then, use screws and nuts to secure the steering wheel.
Finally, insert the backrest into the rear of the body.
3b
b. Fix the left and right handrails to the corresponding position of
the backrest according to the figure, and connect with the
handrails.
c. First the pedal four
square holes into the body
at the bottom of the
convex platform, push
back the pedal to make it
stuck into the hook. Next,
insert the handle into the
backrest.
3c
07