Idiomas disponibles
Idiomas disponibles
ADD/REMOVE THE DEVICE INTO A Z-WAVE
Standard Inclusion (add)
All META Serie 7 devices are compatible with all Z-Wave
controllers. The devices support both the Network Wide Inclusion mechanism (which
offers the ability to be included in a network, even if the device is not directly connected
to the controller) and Normal Inclusion.
By default, the inclusion procedure starts in Normal Inclusion mode and after a short
timeout the procedure continues in Network Wide Inclusion mode that lasts for about
20 Seconds.
Only a controller can add the device into the network. After activating the inclusion
function by the controller, the device can be added by setting it in Learn Mode.
Before including the device, the LED status indicator is solid RED. The adding of a
device is executed by activating the adding procedure in the inclusion section of the
controller interface and then executing 1 or 3 click on the integrated button. As soon
as the inclusion procedure initiates the LED indicator starts a sequence of GREEN-
BLUE blinks. The device is included in the network when the LED status is OFF and the
interview is completed.
Standard exclusion (remove)
Only a controller can remove the device from the network. After activating the exclusion
function by the controller, the device can be removed by setting it in Learn Mode.
The procedure of exclusion can be activated by Removing a node from the Z-Wave
network and executing 1 or 3 click on the integrated button; as soon as the exclusion
initiates, the LED indicator starts a sequence of RED-BLUE blinks. The device is excluded
from the network when the LED status indicator is solid RED and the App_status in the
interface is OK.
NETWORK (classic)
TM
30
/Z-Wave Plus
TM
TM
certified
TM
