Ultimaker PVA Removal Station Guia De Inicio Rapido página 3

Install the PVA Removal Station
After removing the packaging, place the PVA Removal Station on a flat, stable surface.
1. Unbox the PVA Removal 2. Remove all
Station and separate packaging material
the container and from the products
docking station
4. Remove the top cover 5. Fill the container with
and rinsing basket cold water to the
from the container indicator level
An easily accessible mains socket must be used. Be sure that the building installation has
dedicated means for over-current and short-circuiting.
Only use water in the PVA Removal Station. Using any other liquid may damage the product.
3. Connect the power
cable to the underside
of the docking station
and the other end
to a power outlet
6. Place the container on
the docking station
Set up for first use
1. Unlock the rinsing 2. Adjust the basket's
basket, open the lid, divider to restrict
and place the printed movement of the object
object in the basket
4. Place the top cover 5. Turn on the PVA
on the container Removal Station
using the power
button at the front
EN
3. Close the lid and lower
the rinsing basket
into the container
6. Press the rotor button
once for normal rotor
speed or twice for
low rotor speed