Perles Dragon 1000 Manual Original página 19

Cutting metals
Move the grinder moderately according to the material of
the workpiece. Prevent seizing into the workpiece and
oscillation. Move the grinder in the opposite direction
otherwise the cutting disc could fall out of the cut.
Be careful that sparkles generated during work do not
reach inflammable substances or persons in the vicinity.
MAINTENANCE AND SERVICING
Always disconnect the plug from power
source before making any adjustments on
the power tool!
Maintenance and care
• Your tool does not need any special care, though in
time you should check the parts that will wear out under
normal working conditions. This includes checking and
replacing shut-off graphite brushes and the lubricant in
the reducing gearbox. We suggest that you contact our
authorized Service Centers.
Servicing
!
In case of electric or mechanical damage take the
power tool to one of the officially registered Perles
Service Centers. Each individual tampering with the
tool can be dangerous.
!
Repair in unauthorized
performed at your own risk.
!
Please store and handle the accessory(-ies)
carefully. If the replacement of the supply cord is
necessary, this has to be done by Perles or an
authorized Perles service agent in order to avoid a
safety hazard.
Service drawings, spare parts information and addresses
of Service Centers are also available on: www.perles.com
service centers are
WASTE DISPOSAL AND
ENVIRONMENT PROTECTION
The machine,
should be sorted for environmental-friendly
recycling.
!
Do not dispose of power tools into
household waste
Only for EC countries:
According the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner
Subject to change without notice.
7
accessories and packaging
!
en
19