Costway SP37363 Manual Del Usuario página 12

1.AUTO ON/OFF
◆This system turns on when any key is pressed or when it receives an signal input from the speed
sensor.
◆The system turns off automatically when the sensor has no signal input or no key operation
for about 4 minutes.
2.RESET:
The unit can be reset by either changing battery or pressing the mode key for 3 seconds.
3.MODE:
To choose SCAN or LOCK if you do not want the scan mode, press the MODE key when
the pointer starts blinking on the function you want.
4.FUNCTIONS:
1.TIME: Press the MODE key until pointer locks on to TIME. The total working time will be
shown when starting exercise.
2.SPEED: Press the MODE key until pointer locks on to SPEED. Displays current speed during
workout time.
3.DISTANCE: Press the MODE key until pointer locks on to DISTANCE. The distance of each
workout will be displayed when starting exercise.
4.ODOMETER: Press the MODE key until the pointer advances to ODOMETER. The total
accumulated distance will be shown.
5.CALORIE: Press the MODE key until pointer lock on to CALORIE. The calorie burned will be
displayed when starting exercise.
6.(PULSE) : Press the MODE key until the pointer advances to PULSE function and put ear-clip
to ear or take hold of the sensor with your hands for about 3 seconds, the pulse will be displayed.
SCAN: Display changes according to the next diagram every 4 seconds. Automatically display
the following functions in the order shown:
TIME-SPEED-DISTANCE-CALORIE-PULSE
NOTE:
1.If no signal appears in 4-5 minutes, the LCD display will be shut off automatically.
2.When there is signal input, the monitor automatically turns on.
3.If there is a possibility to see an improper display on the monitor, please replace the batteries to
have a good result. You must be to replace the batteries at the same time.
4.The monitor uses 1.5V "AA" or "AAA" batteries.
12