DYU C6 PRO Manual Del Usuario página 7

EN FR DE
1.4 Pedal
How to assemble
Insert the pedal marked "R" into the threaded hole
1.
on the crank end on the right side of riding.
Hold the pedal with your hand, and turn it
2. clockwise for a few rounds. Then clamp the pedal
shaft with the spanner in the package, and turn it
clockwise until fastened.
3. Find the L pedal and repeat the above steps (but
rotate counterclockwise).
4. If you feel resistance when turning the pedal shaft,
immediately remove the pedal to avoid possible
damage. Attach the pedal again and make sure
the pedal shaft is perpendicular to the threaded
hole on the crank. Proceed with the rest of the
steps.
1.5 Battery
Remove the battery
Press the buckle under the saddle, lift the saddle, and remove the battery.
DYU SMART ELECTRIC BIKE C6 PRO INSTRUCTION
ES IT
Remove
the
Keyhole
battery
Battery Define:
INTRODUCTION TO METER
PUSH LOCK: Can remove battery in lock
tongue retracted state remove battery case
after remove;
the key:
OFF: Remove the key when lock tongue
extended, non power-on; battery case
locked, immovable;
ON: Remove the key when lock tongue
extended, in power-on state; battery case
locked, immovable;
Charge the battery
For charging, the battery can stay inside the frame (via the charging port) or be removed from the frame.
LOCK:
The battery is not engaged. The key can be
removed. The battery can be removed
when unlocked. The power cannot be turned
out when charging.
ON:
The battery is engaged. The key can be
removed. The power cannot be turned out
when charging.
OFF:
The battery is not engaged. The key can be
removed. The battery cannot be removed
when locked. The power cannot be turned
out when charging.
Charging Port
008 009