Front Wheel - DYU C6 PRO Manual Del Usuario

EN FR DE

1.1 Front Wheel

How to assemble
I. Basic mechanical principle with the quick release lever
Turn the adjusting nut clockwise to increase clamping, and counter-clockwise to decrease.
For the quick release lever to be in the CLOSE position, turn the adjusting nut clockwise. As the nut screws inwards, the wheel is clamped
onto the frame and locked into the correct position.
Stronger
Quick Adjusting
Release Nut
Adjusting Weaker
Nut Lever
II. How to install
1. Open the quick release lever, and insert the front wheel all the way into the dropouts of the front fork.
Correct
2. With your left hand, turn the adjusting nut clockwise to
fasten up, and with your right hand, close the quick lease
lever. Continue to turn the adjusting nut till the lever runs
parallel to the hub (as indicated below) and resistance
from the lever is felt.
3. Hold the legs of the front fork with your fingers, and use
your palm to press on the quick release lever to lock into
place. The CLOSE mark should face outwards, and the lever
should be ahead of the legs or parallel to them (as
indicated below).
DYU SMART ELECTRIC BIKE C6 PRO INSTRUCTION
ES IT
OPEN Position
Adjusting
Nut
CLOSE
Position
Wrong
1/8 of a circle
for each turn of
the adjusting nut
1.2 Handlebar
How to assemble
1. Pull the riser up, and align it with the head tube and front fork.
2. Press down with your hand, and insert the part with handlebar
all the way into the head tube. Adjust the angle, and fasten
the screws.
Demonstration video is available.
1.3 Seat
1. Loosen the seat tube clamp. 2. Insert the seat tube into the frame.
Adjust the seat tube to desired height,
but never go below the minimum mark.
Tighten the nut and close the clamp.
3. Push the seat left and right to confirm
the stability. If rotation occurs, please
turn the nut clockwise for half a circle,
close the clamp, and check again.
006 007