Storage And Maintenance - DYU C6 PRO Manual Del Usuario

EN FR DE
Check before riding Check before riding
1. 1. The recommended tire pressure is 35-45 PS.
2. The power circuit, lighting circuit, etc. should be normal.
3. 3. The front and rear brakes should function normally. Pull the brakes and check if they can control the wheels tightly. The reflectors should not be
damaged or soiled.
4. When adjusting the handlebar or saddle, be careful not to go beyond the safety marks.
Speed limit:
The speed limit may vary in different regions. Please check your local laws and regulations before riding, and strictly abide
by them.

4. Storage and maintenance

4.1 Storage
4.1.1 Indoor storage
Keep the eBike unfolded as a normal bike. Alternatively, fold the eBike and store it in a corner. Do not keep the battery connected to the mains
while the eBike is in long storage, but charge the battery regularly to maintain battery life.
4.2 Maintenance
4.2.1 Cleaning
Never rinse the eBike. Wipe with a damp cloth to clean.
DYU SMART ELECTRIC BIKE C6 PRO INSTRUCTION
ES IT
After riding, please store the car in a place without direct sunlight or
rain.
4.2.2 Regular inspection
When unpacking
Check all screws in case any is loosened. Reinforce them from time to time to keep them fastened.
Recommended torque: handlebar screw 60-80 kgf.cm (or 52.08-69.44 lbsf.in), steering stem screw 175-200 kgf.cm (or 151.90-173.60 lbsf.in),
saddle screw 175-250 kgf.cm (or 151.90-217.00 lbsf.in), and wheel screw 320-450 kgf.cm (or 277.70-390.60 lbsf.in).
Regular inspection
Regularly check the tension of the chain, which can be adjusted via the chain regulator.
Check the motor and brake frequently. Do not oil the brake.
Always check the tires for scratches, cracks or excessive wear. The inner tube and valve must be perpendicular to the wheel hub at all times.
4.2.3 Replacement of parts
Tire replacement
Punctured, damaged or excessively worn inner tube and tire must be replaced immediately. For repairing and replacing your tire cover, please
contact professional technicians. DYU does not provide replacement.
Modification is prohibited
It is forbidden to modify key structural parts including the frame, front fork and steerer tube, and any electrical parts. The warranty shall not apply
to any part and component that is not original from DYU. The owner shall take sole responsibility for any loss or damage due to modification.
4.2.4 Battery and charging
Storage conditions
Never put the battery in acid or alkaline liquid. Keep away from rain, fire, heat and high temperature. Do not connect the positive to negative, or
vice versa. Do not damage, disassemble, or short-circuit the battery.
When not in use, store the battery in a dry (relative humidity at 65±20%) and cool (temperature at 10-35°C, or 50-95°F) place. Make sure to
charge the battery for two hours each month.
Charge the battery
Use the original charger from the package to charge the battery. Do not disassemble the charger or replace parts and components in the
charger on your own.. The charging current should not exceed 2A. The charger must match with the battery type and applicable voltage. Never
mix the use of different chargers.
Charge only in a well-ventilated area, away from sun and heat. Connect the charger and battery before plugging the charger into the mains.
When charging, if the charging indicator light appears abnormal, a smell is released, or the charger overheats, stop charging immediately.
Service or replace the charger.
To stop charging, unplug from the mains before disconnecting the charger and battery.When the charging indicator turns green, stop charging.
Do not leave the charger connected to any AC power source when not charging.
When in use or in storage, avoid water, other liquid, or other foreign matter inside the battery to prevent short circuit. It is advisable not to carry
the charger with your eBike. If you must, place the charger in a toolbox upon shock absorption treatment.
Recycle the battery
Waste battery is classified as hazardous. Do not dissemble the waste battery on your own. Please contact
professional agency for its recycle.
014 015