Intenso WPD10000 Manual De Instrucciones página 14

USE
Device overview
1 - Status LED
2 - Function key (ON/OFF)
3 - USB-A 1 Out (QC)
4 - USB-C Out (PD/QC) / In (PD)
5 - USB-A 2 Out (QC)
6 - Wireless Charging Area
Operation
Function key (On/Off)
By briefly pressing, the current battery status is displayed through the LED lights and the wireless charging
function of the Powerbank is activated.
If there is no device connected to the Powerbank, or the connected device signals to the power bank that
it is entirely charged, the power bank will automatically switch to the standby mode after a time interval of
approximately 40 seconds.
LED Status display
The individual LEDs display the remaining energy of the Powerbank:
% - energy
1 % - 25 %
26 % - 50 %
51 % - 75%
76 % - 100 %
Commissioning / Charging the Powerbank / Charging connected devices
a) Charging the Powerbank
Please connect the supplied cable USB-C to the port USB-C (USB-C Out/In) of the Powerbank; then
connect the other end of the USB cable to a power supply USB-C or to a port USB-C on your compu-
ter. The charging process and current charging status will be indicated by the LED status lights. If
the Powerbank is entirely charged, the LED status lights remain illuminated. The required char-
ging time of the Powerbank depends on the selected charging source and the output power.
Normal charging:
Use a standard USB power supply or a port with USB on a computer to charge the Powerbank via the USB-C
Out/In port (maximum 5V-3A = maximum 15 watts).
LED 1 LED 2
EN - Page 4 of 7
1
2 3 4 5
LED lights
LED 3
6
LED 4