Adler AD 6806 Manual De Uso página 5

IMPORTANT INSTRUCTIONS REGARDING THE SAFE USE AND MAINTENANCE OF TOOLS
1. WARNING: It is forbidden to leave the sprayer under pressure without adult supervision.
2. WARNING: It is forbidden to store the sprayer under pressure.
3. WARNING: It is forbidden to store spray liquid in the sprayer.
4. WARNING: The maximum temperature of the working fluid cannot exceed 30°C
5. Before using the device, read the user manual and follow the instructions contained therein. The manufacturer is not liable for damage
caused by using the device contrary to its intended use or improper operation.
6. WARNING: Before each use, check the correct operation of the safety valve.
7. When working with the sprayer, it is essential to follow general health and safety rules and regulations.
8. WARNING: This equipment may only be used by adults. The device must not be used by minors, pregnant women, intoxicated
persons or persons under the influence of drugs.
9. It is forbidden to use the sprayer if it is leaking or damaged.
10. It is strictly forbidden to use the sprayer if the safety valve is damaged or does not function properly.
11. When working with harmful substances, it is unacceptable to eat, drink or smoke tobacco or e-cigarettes.
12. Wear protective clothing when working and preparing for work. You should protect your eyes (glasses), respiratory tract (mask) and
skin (protective clothing, headgear, gloves and shoes).
13. When using chemicals, strictly follow the manufacturer's recommendations.
14. If the preparation of the working liquid takes place indoors, this type of work should be carried out in the company of at least two
people.
15. The remains of the working substance should be diluted and used on previously sprayed surfaces.
16. The working fluid should not enter open water.
17. After finishing work, the sprayer should be emptied and washed with clean water.
18. After working with harmful chemicals, wash your entire body thoroughly.
19. The sprayer and all its equipment, packaging and chemicals should be kept out of the reach of children.
20. It is recommended to always put the name of the chemical agent used on the tank. You can use a marker for this.
21. The sprayer that is no longer suitable for further use should be washed and sent to a waste disposal point.
22. The sprayer should be used for private, non-industrial use.
Safety instruction
1.Never open while pressurized.
2.Never unscrew the nozzle (1) while pressurized.
3.After use release the pressure by lifting the safety valve (7) and clean the tank (5), then rinse the nozzle and tank with water.
4.Do not pour residue liquid into the drain.
5.Do not pour the tank by liquid that temperature is below 0 degree of Celsius or above 40 degree of Celsius.
6.Do not pour the tank by corrosive liquids, the tank is intended to be filled up by liquids in range pH 5-10.
Description – look at Figure 8
1.Adjustable spray nozzle
5.Tank
Usage
1.Attach the nozzle (1) by screwing it on in a clockwise direction. Look at Figure 1.
2.Unscrew the pump handle (2) in an anticlockwise direction. Look at Figure 2.
3.Fill with the desired liquid to the MAX level as marked on the tank (5). Look at Figure 3.
4.Screw the pump handle (2) backdown in a clockwise direction. Look at Figure 4.
5.Pump the sprayer until pressurized, usually 10-20 times, max 25 times – it depends on the liquid volume and the type of liquid. Max
pressure 250kPa (2,5 Bars). Look at Figure 5.
6.The safety valve (7) will leak if the air pressure is too high. Do not overfill with air or liquid. Look at Figure 6.
7.The sprayer will work when the trigger (4) on the nozzle handle is pressed. To spray continuously, slide the trigger (4) forward into lock
position after pressing. To unlock, slide the trigger back. Look at Figure 7 & 7-B.
8.Turn the nozzle tip (1) around its axis to regulate the flow of liquid from the sprinkler to the continuous stream.
9. Maintenace: extra 3 spare rubber gasket included.
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
ENGLISH
GENERAL SAFETY CONDITIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
2.Pump handle
6.Piston pump
3.Nozzle connector
7.Safety valve
5
4.Trigger
loading