Giordani CRONO Manual De Instrucciones página 42

Do not use oils or other lubricants
on the safety lock. Defects in the
functioning of the safety lock
are usually caused by inserting
foreign objects into the lock.
CHECKING THE CONDITION
OF THE COMPONENTS
• It is recommended to regularly
check the condition of the
following components to make
sure they are not damaged or
worn:
• Lining: check that the padding
does not come out from the seams.
Check the condition of:
• the seams: they must always be
intact and undamaged.
• harness straps: check that the
fabric lining is not frayed and
that the harness strap is not
worn out in the areas around
th e a d j u ste r o n th e c ro tch
strap, shoulders and harness
adjustment plate.
• plastic parts: check that the
plastic parts are not worn out,
damaged or faded.
• WARNING! BEFORE US E, REMOVE
AND DISPOSE OF ALL PLASTIC
BAGS AND PACKAGING MATERIALS
AND KEEP THEM OUT OF REACH OF
CHILDREN IT IS RECOMMENDED
TO DISPOSE OF THESE ITEMS AT
AN APPROPRIATE WASTE SORTING
COLLECTION POINT, AS REQUIRED
BY REGULATIONS IN FORCE.
• WARNING! If the child car seat is
R388_CRONO_(KX 115)_Libretto_v5ok.indd 42 R388_CRONO_(KX 115)_Libretto_v5ok.indd 42
WARNINGS
damaged, deformed or excessively
worn, it must be replaced as its
original safety features may have
been compromised. Make sure
there are no protruding elements
that could cause damage to the
child or to the vehicle upholstery:
in this case, do not use the child
seat or contact the manufacturer
if in doubt.
• The metal parts and plastic parts
of the safety seat must be fastened
by referring to the manual, which
ensures that the safety seat does
not get caught on the vehicle seat
or in the door.
• Any straps securing the child
restraint system to the vehicle
should be tight and adjusted to fit
the child's body, and should not
be twisted.
• The lap belt must be worn low,
so that the pelvis is firmly secured.
• The safety seat must not be used
after it has been involved in an
accident.
• It is dangerous to make any
alterations or additions to the safety
seat without the manufacturer's
approval. The installation instructions
provided by the manufacturer of
the child restraint system must be
followed closely to ensure the
child's safety.
• The safety seat should be kept out
of direct sunlight, otherwise it may
be too hot for the child's skin.
• Please do not leave your child
42
una
sys
• Any
to c
coll
• a: T
use
• b: T
rep
tha
ma
par
• The
rest
as l
• Do
poi
in t
the
• The
par
mu
so
the
eve
• Any
to c
coll
• Saf
pro
can
but
pre
of c
• Ple
cor
app
as
10/11/23 14:11 10/11/23 14:11