Idiomas disponibles
Idiomas disponibles
GENERAL FUNCTIONS
1. TRANSPORT TRAY – This tray is used to load and unload a compact disc into the mechanism. The tray is
opened and closed by pressing the OPEN/CLOSE BUTTON. Never attempt to force the transport tray open
or closed when the power is turned off.
2. OPEN/CLOSE button (Transport Tray Open/Close) – This button is used to open and close the
transport tray. NOTE: When a disc is already loaded in the transport tray, the tray will not open unless the
unit is in pause or cue mode.
3. POWER SWITCH button – This switch is used to control the unit's main power. A blue LED directly above
the power switch will glow to indicate main power is active.
4. AUDIO OUT R & L sockets – These jacks send a left and right analog mono output signal. Use these jacks to
send standard audio to a mixer or receiver. The red colored jack represents the right channel output and white
jack represents the left channels output.
5. DIGITAL OUT socket – This jack sends a digital stereo out signal. Use this connection to create near
perfect copies of your disc to a Mini disc, CD-R, or any other recording device with a digital input.
6. VOLTAGE selector – 115V AC and 230V AC switch.
7. POWER connector – This is the main power connection. Only use the supplied polarized power cord. Use
of any other power may result in sever damage to the unit. Be sure the local power matches the unit's
required power.
8. REMOTE jack - Connect the supplied 8 pin cable from this jack to the remote control's connector. This will
allow you to control the player functions with the remote unit.
1
2
3
2
4
5
6
7
5
PLAY UNIT
1
8
5
4
