Idiomas disponibles
Idiomas disponibles
Using the Lanyard
Adjusting
The supplied Pocketalker Lanyard (RCS 003) provides a convenient
Neckloop
way of transporting the Pocketalker from place to place; it protects your
investment from accidental dropping, and provides quick and easy
access for operation whenever it is needed.
WARNING!
To prevent strangulation, the lanyard should
not be used if there is a risk of getting it lodged or stuck in machinery or other
objects.
Pocketalker
worn hanging
around the
neck with
the supplied
Pocketalker
Lanyard
Operating the
Pocketalker
at a table using
the Lanyard as a
wrist strap
Step 1
Installing the Lanyard (RCS 003)
Step 1
Step 2
18
Cord Lock "Bead"
Pull up to tighten
Neckloop "Housing"
Hold down while
tightening
Step 2
Step 3
Step 3
The RCS 003 Lanyard
has a safety breakaway
feature that disconnects
when too much tension
is applied to the lanyard.
LED Indicators
Power
Charge LED T-Coil
LED
On
Off
Fast
Off
blinks
Slow blinks
On
(charger
plugged in)
Off
(charger
plugged in)
Off
Off
Fast blinks
Fast
Slow
A547
Fast
0.4 Sec
Condition Indicated
LED
Operating normally; battery level
sufficient
Battery is low
Battery is charging
Battery charging complete
No batteries detected or charger not
detected
T-coil in use; internal and external
On
mic jack disabled
T-coil not in use; internal mic enabled
Off
(or external mic if plugged in)
Battery too low to operate
Batteries are too low to charge.
PockeTalker is attempting to
recondition batteries. If fast blinks
persist for more than 2 hours,
batteries are bad; replace with new
batteries. If recondition attempt is
successful, Charge LED will change
to slow blinks, indicating that normal
charging is now occuring.
LED Blink Rates
Fast: 4 blinks every 2 seconds
Slow: 1 blink every 2 seconds
19
